MQL Starter Kit for Saws

 
 
 
 
 
 
Back to List
$820.00
SKU: ST-1A4GKBX-CBA310
Qty:

 

The MQL Starter Kit for Saws equips a band saw or circular saw with Minimum Quantity Lubrication. MQL delivers a precise, atomized spray directly to the blade's gullet. Up to 500% longer blade life, less galling, no mess, and clean chips. Ideal for standalone saws where reliability and performance matter most.

Great for:

Band saws
Circular Saws
Unist Uni-Max ST adjustments

Maximum control

Independently adjust pump cycle rate, pump stroke, and airflow.

MQL atomization

Superior spray

Air and fluid mix at the nozzle tip, maximizing spray performance.

230 micro pump

Trusted reliability

230 Micro Pumps™ are built to last 12 million pump cycles.

ST MQL nozzle

Aim with precision

Deliver lubrication to blade sides, teeth and gullet.

Improve tool life up to 500%
Use as little as 2–4 ounces per shift
Easily maintain a clean work environment
Eliminate manual lubrication
Tested to 12 million pump cycles
100+ hours of operation per gallon

Why Unist?

Other Systems vs. MQL Starter Kit for Saws

Venturi-style misters MQL Starter Kit for Saws
Difficult to dispense low (µL) volumes of fluid Easy, precise adjustment below 20µL per stroke
Output shifts with air pressure and ambient temperature Fixed volume metered per stroke, independent of air pressure or temperature
Prone to fog Consistent atomization, no fog
Wet, sticky chips Dry, easy-to-handle chips

What's in the box

MQL Starter Kit for Saws Includes

  1. Just add Unist MQL lubricant®
    Use as little as 2–4 oz per shift. MQL Starter Kit features 28 oz reservoir.
  2. The best Minimum Quantity Lubricant
    Kit includes 8 oz of Coolube® 2210.
  3. Chip free
    Rugged chip guard keeps components clean and protected.
  4. Use around the shop
    Easy to move magnetic mounting.
  5. Precise control
    Easily adjust pump cycle rate between 5–200 strokes per minute.
    Recommended rate: 5–30.
  6. Simple actuation
    Manual on/off valve.
  7. Reliable performance
    40µL positive-displacement pump with adjustable stroke and airflow.
  8. Precision lubrication
    Deliver lubrication to blade sides, teeth and gullet.
  9. Flexible positioning
    10' coiled and (not shown) 10' straight 1/8" extension hose.
  10. Success cards
    Magnet-mounted instructions keep adjustment recommendations handy.
MQL Starter Kit for Saws includes

How It Works

An air-driven, positive-displacement pump meters lubricant with each stroke. A pulse generator cycles the pump automatically and continuously, applying an external film of lubricant at the tool-work interface.

The BAT nozzle spreads lubricant evenly across the blade sides, teeth, and gullet. Clear gullets are critical, each must be free of chips before reentering the cut. Flood coolant can make chips sticky and pack the gullet. Unist MQL keeps chips dry and free-flowing, so every tooth cuts clean. Less friction, lower cutting forces, longer blade life, straighter cuts.

See It In Action

Structural sawing
Uni-Max ST on Ellis Saw
Circular Sawing with MQL

Specifications

Technical Data

Requirements  
Fluid viscosity range Fluids between 30-5000 SUS
Recommend: Unist MQL lubricants
Supply air pressure Clean, dry compressed air, 80–100 psi [5.5–7 bar]
Airflow rate 0–4.7 SCFM [0–131 LPM] for each air and oil output. 1–2 SCFM [28–56 LPM] typical
Specifications  
Max pump output and max cycle rate 40µL: 600 mL/hr*, 200 cycles/min
20µL and 60µL pumps available.
Pump timer Pneumatic pulse generator: Recommended: 5–30 pulses/min.
Maximum: 200 pulses/min. (not recommended for continuous operation)
Operating temperature 32˚–122˚F [0˚–50˚C]
Storage temperature 4˚–158˚F [-16˚–70˚C]

*Fluid cycles per minute based on Coolube® 2210

Lifetime Pump Warranty

Built to perform. Backed for life.

Our field-proven pumps are engineered for performance and tested to 12 million cycles to ensure durability. We're so confident in our pump technology that when used properly, we stand behind them with a lifetime pump warranty.

Qualifying pumps are covered for life when you:

  • Use Unist lubricants exclusively in your system
  • Maintain proper system cleanliness
Read the full warranty
Unist pump components

Which Unist MQL kit is right for me?

Compare the Kits

Kit Nozzles Best For
MQL Starter Kit for Saws 1 Circular saws and bandsaws
MQL Starter 1 Mills, drill presses, lathes, broaches — ½" tooling and smaller
MQL Router Kit 2 CNC routers, 3-axis mills, larger tooling

Need a different configuration?

Standard kits cover basic sawing applications. For band saws larger than 1" or circular saws larger than 20", two or more nozzles are recommended for full coverage. The Uni-Max® product line offers a wide range of configurations, including multiple pumps, pump sizes, digital pump cycle rate control, nozzle options, reservoir sizes, and electronic or air solenoid actuation. Actuation integrates easily with your saw's existing controls or voltage.

Request a Quote

Common questions

FAQ

How much air does the MQL Starter Kit require?

80–100 psi [5.5–7 bar] of clean, dry air. Each air and oil output requires 0–4.7 SCFM [0–131 LPM], 1–2 SCFM [28–56 LPM] is typical.

What lubricant should I use?

We recommend Unist lubricants. They're engineered specifically for MQL applications and qualify your system for the lifetime pump warranty when used exclusively. Coolube® delivers strong lubricity across a range of materials, with formulations matched to what you're machining. MicroTrace® is designed to evaporate cleanly, with minimal to no cleanup required.

How long does one gallon of Unist Lubricant last in the MQL Starter Kit?

At factory settings, most applications use 2–4 oz per shift, giving 100+ hours of run time per gallon.

Does Unist offer different nozzles? What if I need more than one?

Yes. Unist offers a range of nozzles for different applications and mounting requirements — see the full lineup on our nozzle options page. Band saws larger than 1" or circular saws larger than 20" typically need two or more nozzles for full coverage. For multi-nozzle setups or other configurations, contact us and we'll help spec the right system.

Does the MQL Starter Kit for Saws work with my saw brand?

Yes. We offer pre-configured solutions for major saw OEMs, including HE&M Saw, Amada, Cosen, DoALL, Wellsaw, Roll-In Saw, MetlSaw, Haberle, TigerStop, SOCO, Vista Machines, Joseph Machine Company, and DeMichele Group. If your saw isn't listed, contact us and we'll help spec the right system.

Does Unist offer different enclosure options?

Yes. A full enclosure with an available lock is offered for the system. Request this option through our website.

Is 28 oz the only reservoir size available?

No. Unist reservoirs are available in 28 oz, 64 oz, and 64 oz with a low-level sensor for applications that need a visual or wired alert before running dry.

What actuation methods are available?

The MQL Starter Kit uses a manual slide valve as standard. Upon request, the system can be configured with a 110 VAC, 24 VAC, 220 VAC, or 24 VDC solenoid, an air pilot valve, or a foot pedal. Actuation can also be integrated directly into your saw's existing controls or voltage.

When should I consider a custom-configured system instead of the standard kit?

If your saw falls outside standard nozzle coverage (band saws larger than 1" or circular saws larger than 20"), or you need a specific actuation method integrated into your machine's controls, contact us for a configuration built to your setup.

What if I need greater control than the pulse generator allows?

The Pulse R™ digital pump timer offers exact settings between 0–250 pump strokes per minute for applications that need finer control.

What's the lead time on a MQL Starter Kit order?

Webstore orders ship within 5 business days. Custom configurations have a 10 business day lead time.

Customer Reviews

There are no customer reviews for this product. However, you can be the first person to add a review for this product.

Add Review

 
 
 
 
 

(Your browser will be redirected back to this page)